Quick Shine® Q & A
At Quick Shine®, we know how important it is to keep your floors looking their best. Whether you’re using our Floor Finish, Hardwood Floor Luster, or our cleaners, you might have a few questions along the way. No worries—we’ve got you covered! Here are some Quick Shine Q & A of the most common questions we hear from Quick Shine® users, along with expert answers to keep your floors shining.
Q: Where can I find Quick Shine® Floor Finish or Quick Shine® Hardwood Floor Luster?
A: You can find our Floor Finish and Hardwood Floor Luster at most major retailers and even some local stores near you. To check availability in your area, use our Store Locator to see where you can pick up your favorite Quick Shine® products.
Q: I accidentally got some Floor Finish on my table. How do I remove it without causing damage?
A: Accidents happen! If you get Floor Finish or Hardwood Floor Luster on your table, countertop, or even walls and appliances, don’t worry—it’s easy to clean up. Just spray a little Windex or Formula 409 on the area, let it sit for a minute, and wipe it away with a damp cloth or sponge.
Q: After applying Quick Shine® Floor Finish, what should I use to clean my floors?
A: To keep your floors looking great, we recommend using our Quick Shine® Multi-Surface Floor Cleaner with a microfiber pad or our Multi-Surface Spray Mop. However, after applying Floor Finish, wait 4-5 days before using any liquid cleaner to allow the finish to fully cure. In the meantime, you can dust mop to remove dirt and debris.
Q: I used Quick Shine® Floor Cleaner, but my floors aren’t shiny. What happened?
A: Great question! Quick Shine® is our brand name, but not every product in our lineup is designed to add shine. Our Floor Cleaners, including Quick Shine® Multi-Surface Floor Cleaner and Quick Shine® Hardwood Floor Cleaner, are made for everyday cleaning. If you want to add shine, apply Quick Shine® Floor Finish or Quick Shine® Hardwood Floor Luster for that beautiful, glossy look.
Q: My floors look streaky and cloudy after applying Quick Shine® Floor Finish. What went wrong?
A: Streaking or cloudiness can happen for a few reasons:
1️⃣ Not applying enough product—this can often be corrected with another coat.
2️⃣ Residue from previous cleaners (like vinegar solutions or other brands’ products) reacting with the Floor Finish.
3️⃣ Using the same applicator pad for both cleaning and applying the finish.
4️⃣ Applying additional coats too soon—make sure each coat is fully dry before adding another.
5️⃣ Trying to apply too many coats in a short time.
If you’re experiencing streaks, don’t worry! You can remove buildup with our Quick Shine® Deep Cleaner/Wax Remover and start fresh.
Got more questions? We’re here to help! Check out our full FAQ section or reach out to our friendly team for expert advice. Happy shining!
How long should I wait before putting furniture back? How long should I wait before actually walking on the floor barefoot?
Thank You.
Hi Lynn,
Quick Shine Floor Finishes dry within 45-60 minutes. You can walk barefoot on your floors after it fully dries. It is important to keep moisture off of the floor for a few days as it fully cures so we recommend dry dusting during that time to keep dust/debris at a minimum. You should be able to place furniture back in place after a few hours, however it is always recommended to lift vs scooting heavy furniture to avoid scuffing.
I have been using Quick shine for years, now there’s a build-up, how can I clean it and start over. My mistakes were applying over and over on top of the old. It has been over 10 years just putting new on top of the old, I’m just realizing it’s not a mop and go 😔
Hi Gloria,
To correct your situation, we recommend using Quick Shine® Deep Cleaner to safely remove our Finish from your floors. This product was specifically developed to remove polymer and wax finishes without harming hardwood floors or other types of hard surface floors such as tile, vinyl, stone, marble, and laminate. It is also important to note that Quick Shine® Deep Cleaner can also be used to treat small imperfection areas of the floor without treating the entire floor.
Simply dilute the Deep Cleaner in HOT water and apply to the floor surface in small 5’ x 5’ squares at a time, let stand for a few minutes and agitate. Remove debris and build-up from each 5’ x 5’ area of the floor with a clear water rinse. For heavy buildup, you may need to increase the dilution of 1 cup per gallon to 3 cups per gallon. Deep Cleaner is concentrated, therefore one 27 oz. bottle will make roughly 2 gallons, which covers about 500 square feet and will not damage the sealant on hardwood floors. It is also important to note that Quick Shine® Deep Cleaner can also be used to treat small imperfection areas of the floor without treating the entire floor. After treating the small problem area let dry after rinsing and simply wipe a coat of the Quick Shine® Floor Finish on the treated area. This area will then blend in with the rest of the finished floor due to the advanced leveling agents in the formula. The Quick Shine Deep Cleaner is only available online at http://www.walmart.com, http://www.quickshine.net or by calling our Customer Service Center.
It’s been 4 years since I applied quick shine it’s still shiny but not as bright is it okay to give it another coat or will they turn yellow.
Hi Anthony,
Yes, we recommend to damp mop your floors first with a pH neutral floor cleaner or with plain tap water. Once the floor is clean and dry, simply reapply a new coat of Finish to restore the shine. Our Finish is not a wax, therefore it will not yellow over time.
I refinished my floor without moving my dining room table, can I move the piece of furniture to refinish at a later timeM or will it look odd?
Hi Maryanne,
Yes, When you move your furniture, just apply Quick Shine to the untreated area with a clean damp cloth and blend.
I have a newly installed ceramic tile (on a diag.) and and did not know we would have grout. My floor is lifeless — no shine. Also, what about the grout? Can u advise me as to what to do about my new floor. I don’t want the grout to get dark and the tiles to get blahh looking. I would love your input. Thank u so much. TC
Hi Theresa,
You can apply Quick Shine Multi-Surface Floor Finish on your sealed ceramic tile and grout to provide a protective high gloss shine. This will not darken your grout if your floor has been sealed.
We applied quick shine floor finish to our luxury vinyl tile and the floors looked excellent. They looked great. When we moved some furniture back into its place with a blanket underneath the furniture it’s still left scuff marks. How do we remove the scuff marks?
Hi Sandy,
If you have already tried to buff out the scuff marks with no success, we recommend spot treating the area with a mixture of 2-3 tbsp. of Ammonia with 1 cup of HOT water. Apply solution to area and let sit 2-3 minutes before wiping away. Once the area is clean and dry, simply reapply a new coat of Finish to blend and even out the appearance of the floor. This method has worked for other consumers with similar issues.
I squirted floor shine on my Trex composite deck and it has white stains now. How do I remove? Tried ammonia, vinegar, composite deck cleaner.
Hi Gerry,
To correct your situation, we recommend using Quick Shine® Deep Cleaner to safely remove our Finish from your floors. This product was specifically developed to remove polymer and wax finishes without harming hardwood floors or other types of hard surface floors such as tile, vinyl, stone, marble, and laminate. It is also important to note that Quick Shine® Deep Cleaner can also be used to treat small imperfection areas of the floor without treating the entire floor.
Simply dilute the Deep Cleaner in HOT water and apply to the floor surface in small 5’ x 5’ squares at a time, let stand for a few minutes and agitate. Remove debris and build-up from each 5’ x 5’ area of the floor with a clear water rinse. For heavy buildup, you may need to increase the dilution of 1 cup per gallon to 3 cups per gallon. Deep Cleaner is concentrated, therefore one 27 oz. bottle will make roughly 2 gallons, which covers about 500 square feet and will not damage the sealant on hardwood floors. It is also important to note that Quick Shine® Deep Cleaner can also be used to treat small imperfection areas of the floor without treating the entire floor. After treating the small problem area let dry after rinsing and simply wipe a coat of the Quick Shine® Floor Finish on the treated area. This area will then blend in with the rest of the finished floor due to the advanced leveling agents in the formula. The Quick Shine Deep Cleaner is only available online at http://www.walmart.com, http://www.quickshine.net or by calling our Customer Service Center.
I used quickshine to clean our wood look Matt porcelain floors.
It has left shiny spots in various places and we have been unable to remove it.
We tried windex and other cleaners but none helped.
Pls advise
Hi Michael,
To correct your situation, we recommend using Quick Shine® Deep Cleaner to safely remove our Finish from your floors. This product was specifically developed to remove polymer and wax finishes without harming hardwood floors or other types of hard surface floors such as tile, vinyl, stone, marble, and laminate. It is also important to note that Quick Shine® Deep Cleaner can also be used to treat small imperfection areas of the floor without treating the entire floor.
Simply dilute the Deep Cleaner in HOT water and apply to the floor surface in small 5’ x 5’ squares at a time, let stand for a few minutes and agitate. Remove debris and build-up from each 5’ x 5’ area of the floor with a clear water rinse. For heavy buildup, you may need to increase the dilution of 1 cup per gallon to 3 cups per gallon. Deep Cleaner is concentrated, therefore one 27 oz. bottle will make roughly 2 gallons, which covers about 500 square feet and will not damage the sealant on hardwood floors. It is also important to note that Quick Shine® Deep Cleaner can also be used to treat small imperfection areas of the floor without treating the entire floor. After treating the small problem area let dry after rinsing and simply wipe a coat of the Quick Shine® Floor Finish on the treated area. This area will then blend in with the rest of the finished floor due to the advanced leveling agents in the formula. The Quick Shine Deep Cleaner is only available online at http://www.walmart.com, http://www.quickshine.net or by calling our Customer Service Center.
My floor gets tackie even after just washing the next week floor still looks great but it is still tackie.
Hi Gloria,
What are you cleaning your floors with? Have you tried a clean water rinse after your regular cleaner? This may help with the tackiness.
I love Quick Shine it makes my floors look beautiful! However, we recently got a puppy and her shedding has caused her hair to stick to the floor even after vacuuming or sweeping beforehand and waiting for floor to be completely dry.
Although, I will still continue to use Quick Shine, I will be using it as a cleaner and not as a shine for that wow effect. I’d like to remove the shine for easier cleaning and start over, but I am unable to remove the shine that is on now. I have used formula 409 and Windex and have followed the directions as explained on your website with no luck. Please tell me what I’m doing wrong or if you have any other suggestions. Thank you.
Hi Cyndi,
Thank you for your brand loyalty. To remove the finish from your floors, we recommend using our Quick Shine Deep Cleaner. Windex or Formula 409 are great for small spots but not recommended for removing the entire finish from your floors.
Simply dilute the Deep Cleaner in HOT water and apply to the floor surface in small 5’ x 5’ squares at a time, let stand for a few minutes and agitate. Remove debris and build-up from each 5’ x 5’ area of the floor with a clear water rinse. For heavy buildup, you may need to increase the dilution of 1 cup per gallon to 3 cups per gallon. Deep Cleaner is concentrated, therefore one 27 oz. bottle will make roughly 2 gallons, which covers about 500 square feet and will not damage the sealant on hardwood floors. It is also important to note that Quick Shine® Deep Cleaner can also be used to treat small imperfection areas of the floor without treating the entire floor. After treating the small problem area let dry after rinsing and simply wipe a coat of the Quick Shine® Floor Finish on the treated area. This area will then blend in with the rest of the finished floor due to the advanced leveling agents in the formula. The Quick Shine Deep Cleaner is only available online at http://www.walmart.com, http://www.quickshine.net or by calling our Customer Service Center.
I made the mistake of using QUICK SHINE on our bamboo floors throughout our house. And I mean it was a huge mistake. Our bamboo is tongue and groove boards and this product got in between each board. I have started having to use A knife to dig every bit of this junk out of my floors one board at a time. Trying to mop it up it’s impossible. I have scrubbed and scrubbed yet when it dries there will be build up where my mop stopped that you cannot get up. What I have mopped up dries like white glue. It looks like I’m going to have to strip these floors and they cost us a fortune. Yes there is a floor cleaner made by these manufacturers but I would not dare put another one of their products anywhere near my house. It is a disaster.
Hi Amye,
Thank you for your feedback. We are sorry to hear you did not achieve satisfactory results on your bamboo floors. You can safely remove our Finish with Quick Shine Deep Cleaner which is much safer and will not damage your floors. This product will also remove the white residue in between the planks. Please contact us directly at 800-255-1891 and we can further assist you.
I have used quick shine on my hardwood floors for year and have been very satisfied; however, I used it on my new, commercial grade vinyl planking, in my basement and there was a water leak with sat in the floor for a day before being discovered and the areas where the water sat are now cloudy and I am unable to clear them up.
Hi Sherry,
To remove the cloudy haze from your floor, we recommend using our Quick Shine Deep Cleaner.
Simply dilute the Deep Cleaner in HOT water and apply to the floor surface in small 5’ x 5’ squares at a time, let stand for a few minutes and agitate. Remove debris and build-up from each 5’ x 5’ area of the floor with a clear water rinse. For heavy buildup, you may need to increase the dilution of 1 cup per gallon to 3 cups per gallon. Deep Cleaner is concentrated, therefore one 27 oz. bottle will make roughly 2 gallons, which covers about 500 square feet and will not damage the sealant on hardwood floors. It is also important to note that Quick Shine® Deep Cleaner can also be used to treat small imperfection areas of the floor without treating the entire floor. After treating the small problem area let dry after rinsing and simply wipe a coat of the Quick Shine® Floor Finish on the treated area. This area will then blend in with the rest of the finished floor due to the advanced leveling agents in the formula. The Quick Shine Deep Cleaner is only available online at http://www.walmart.com, http://www.quickshine.net or by calling our Customer Service Center.
How do I get layers of old quick shine wax off my floors. I have only used your product for years now I have quite a build up of old wax.
Hi Bernadina,
To remove the layers of buildup from your floor, we recommend using our Quick Shine Deep Cleaner.
Simply dilute the Deep Cleaner in HOT water and apply to the floor surface in small 5’ x 5’ squares at a time, let stand for a few minutes and agitate. Remove debris and build-up from each 5’ x 5’ area of the floor with a clear water rinse. For heavy buildup, you may need to increase the dilution of 1 cup per gallon to 3 cups per gallon. Deep Cleaner is concentrated, therefore one 27 oz. bottle will make roughly 2 gallons, which covers about 500 square feet and will not damage the sealant on hardwood floors. The Quick Shine Deep Cleaner is only available online at http://www.walmart.com, http://www.quickshine.net or by calling our Customer Service Center.
When I applied the Quick Shine Floor Finish to my luxury vinyl tile floor, I missed mopping up certain spots where it was squirted. Now I see spots where the finished dried . How I can these spots of finish be removed safely without damaging the flooring ?
Hi John,
You can spot treat the compromised area with a mixture of 3-4 tbsp. of Ammonia and 1 cup of HOT water. Apply solution to the area and let sit 1-2 minutes before wiping away. Once the area is clean and dry, simply reapply a new coat of Finish to the area and blend. This method has worked for other consumers with similar issues.
I used the deep clean to remove the heavy wax buildup but it is still there will mineral sprits work to remove everything right away from the floor? Since mineral sprits are safe for hardwood floors.
Hi David,
Unfortunately you will need an amine base to remove the finish so mineral spirits will not work. You can make a stronger dilution if you have a heavy buildup. The Deep Cleaner is guaranteed to remove our Finish as it was formulated specifically to dissolve it. It may take some time if there are several layers to get through.