Quick Shine® Q & A
At Quick Shine®, we know how important it is to keep your floors looking their best. Whether you’re using our Floor Finish, Hardwood Floor Luster, or our cleaners, you might have a few questions along the way. No worries—we’ve got you covered! Here are some Quick Shine Q & A of the most common questions we hear from Quick Shine® users, along with expert answers to keep your floors shining.
Q: Where can I find Quick Shine® Floor Finish or Quick Shine® Hardwood Floor Luster?
A: You can find our Floor Finish and Hardwood Floor Luster at most major retailers and even some local stores near you. To check availability in your area, use our Store Locator to see where you can pick up your favorite Quick Shine® products.
Q: I accidentally got some Floor Finish on my table. How do I remove it without causing damage?
A: Accidents happen! If you get Floor Finish or Hardwood Floor Luster on your table, countertop, or even walls and appliances, don’t worry—it’s easy to clean up. Just spray a little Windex or Formula 409 on the area, let it sit for a minute, and wipe it away with a damp cloth or sponge.
Q: After applying Quick Shine® Floor Finish, what should I use to clean my floors?
A: To keep your floors looking great, we recommend using our Quick Shine® Multi-Surface Floor Cleaner with a microfiber pad or our Multi-Surface Spray Mop. However, after applying Floor Finish, wait 4-5 days before using any liquid cleaner to allow the finish to fully cure. In the meantime, you can dust mop to remove dirt and debris.
Q: I used Quick Shine® Floor Cleaner, but my floors aren’t shiny. What happened?
A: Great question! Quick Shine® is our brand name, but not every product in our lineup is designed to add shine. Our Floor Cleaners, including Quick Shine® Multi-Surface Floor Cleaner and Quick Shine® Hardwood Floor Cleaner, are made for everyday cleaning. If you want to add shine, apply Quick Shine® Floor Finish or Quick Shine® Hardwood Floor Luster for that beautiful, glossy look.
Q: My floors look streaky and cloudy after applying Quick Shine® Floor Finish. What went wrong?
A: Streaking or cloudiness can happen for a few reasons:
1️⃣ Not applying enough product—this can often be corrected with another coat.
2️⃣ Residue from previous cleaners (like vinegar solutions or other brands’ products) reacting with the Floor Finish.
3️⃣ Using the same applicator pad for both cleaning and applying the finish.
4️⃣ Applying additional coats too soon—make sure each coat is fully dry before adding another.
5️⃣ Trying to apply too many coats in a short time.
If you’re experiencing streaks, don’t worry! You can remove buildup with our Quick Shine® Deep Cleaner/Wax Remover and start fresh.
Got more questions? We’re here to help! Check out our full FAQ section or reach out to our friendly team for expert advice. Happy shining!
After using this product if I drop water on the floor and try and wipe it up it leaves marks on my floor.
Why is this happening!?
My floor is now looking awful
Hi Christine,
If the finish was recently applied and had not fully cured, any moisture that sits on the surface can absorb into the finish causing water spots. We recommend spot treating this affected area with our Quick Shine Deep Cleaner. Once the finish has successfully been removed, simply reapply a new coat to even out the appearance of the floor again. If this area is around a sink or bathroom, it may be helpful to place a rug temporarily until the finish is fully cured and can withstand cleaning and moisture. For more information, please contact customer service at 800-255-1891. We are always happy to help!
I applied the quick shine in my new Laminate flooring. I have a Bulldog that makes a mess. After two days the floor looks just awe full and no matter what i’ve tried it is coming up ! What should I do in order to get this off my New Laminate floor ?
Hi Blythe,
We recommend removing Quick Shine Finish from your floors with Quick Shine Deep Cleaner. Simply dilute our Deep Cleaner with hot water and apply to 5′ sections at a time. Allow solution to sit for 3-4 minutes and mop away. Quick Shine Deep Cleaner is only available online at this time at http://www.quickshine.net or http://www.walmart.com. For more information, please contact customer service at 800-255-1891. We are always happy to help!
How often should I reapply quickshine?
Kara,
We recommend applying Quick Shine every 2-6 months when needed to your floors. Simply maintain the shine in between applications with our Quick Shine Cleaners.
I applied Quick Shine hardwood floor luster on my laminate floor. It was a mistake. I have a shiny floor with streaks everywhere. I applied a second coat two days later thinking it would cover up the strokes and streaks. Same thing , maybe worse. How do I remove this product from my laminate floor? It’s a very large area and it looks awful. Please help. I tried windex in a spot. It removed everything including the original luster.of the flooring. Is this my only option? Do you think hot water with a floor washer will do it?
Hi Perry,
You can remove our Finish and get back to the original floors with Quick Shine Deep Cleaner. This product was specifically developed to remove polymer and wax finishes without harming hardwood floors or other types of hard surface floors such as tile, vinyl, stone, marble, and laminate. It is also important to note that Quick Shine® Deep Cleaner can also be used to treat small imperfection areas of the floor without treating the entire floor.
Simply dilute the Deep Cleaner in HOT water and apply to the floor surface, let stand for a few minutes and agitate. Do small sections of the floor at a time. Then remove debris and build-up from the floor with a clear water rinse. For heavy buildup, you may need to increase the dilution of 1 cup per gallon to 3 cups per gallon. Deep Cleaner is concentrated, therefore one 27 oz. bottle will make roughly 2 gallons, which covers about 500 square feet and will not damage the sealant on hardwood floors. It is also important to note that Quick Shine® Deep Cleaner can also be used to treat small imperfection areas of the floor without treating the entire floor. After treating the small problem area let dry and simply wipe a coat of the Quick Shine® Finish on the treated area. This area will then blend in with the rest of the finished floor due to the advanced leveling agents in the formula. The Quick Shine Deep Cleaner is only available online at http://www.walmart.com, http://www.quickshine.net or by calling our Customer Service Center. We would like to send you a complimentary bottle to try if you can provide us your shipping address.
After using our Deep Cleaner, apply two or three coats of Quick Shine Floor Finish once each coat of finish has completely dried. You will be amazed at the deep, rich, even, protective glow. You will not need to go through the removing process again if applied and maintained correctly.
Visit us on the web anytime at http://www.quickshine.net. In addition, you can visit our Floor Care FAQ page on our web site for further answers to questions regarding the Quick Shine program or call our Customer Service number M-F at 1-800-255-1891 from 8am to 4:30pm EST with any further questions.
The quick shine hardwood high traffic did not shine but left the hardwood dull. Can I remove the product.
Hi Linda,
We recommend removing our Quick Shine Luster from your floors with Quick Shine Deep Cleaner. Simply dilute our Deep Cleaner with hot water and apply to 5′ sections at a time. Allow solution to sit for 3-4 minutes and mop away. Quick Shine Deep Cleaner is only available online at this time at http://www.quickshine.net or http://www.walmart.com. For more information, please contact customer service at 800-255-1891. We are always happy to help!
Hi, I want remove shine that I applied to some part of my wood floor. I dont like the look of the shine and want to remove it. Is there a product for such application?
Hi Sarma,
We recommend removing Quick Shine Finishes from your floors with Quick Shine Deep Cleaner. Simply dilute our Deep Cleaner with hot water and apply to 5′ sections at a time. Allow solution to sit for 3-4 minutes and mop away. Quick Shine Deep Cleaner is only available online at this time at http://www.quickshine.net or http://www.walmart.com. For more information, please contact customer service at 800-255-1891. We are always happy to help!
Is Quick shine good for Terazzo Floor
Hi Marie,
Yes, Quick Shine can be used on any sealed hard surface flooring including Terazzo. Simply squirt and spread with a clean, damp mop and allow to dry. Multiple coats may be applied for added durability and shine.
We just got Porcelain Tile (wood-look) 6′ x 24″ installed over a large portion of our house. The tile seems gritty when you move a dining chair with nylon super glides, even after several cleaning. Home Depot said a sealer is not recommended, and that the gritty sound when moving a chair is normal for porcelain tile. We also wanted a glossy shine. We’ve used your QUICK SHINE FLOOR FINISH on our old vinyl floors and were very pleased with it.
(1) Is your FLOOR FINISH a sealer? (2) Can it be used effectively on porcelain tile? (3) Will it produce a shine for a few weeks or months without any buildup? (4) What kind of chair tips do you recommend? (5) Does HOLLYWAY HOUSE recommend FLOOR FINISH for porcelain tile?
I read the back of the bottle, and am still not sure if it is a sealer OR if it produces a buildup. THANKS,
Hi Vernon,
We are so glad to hear you achieved great results with Quick Shine on your porcelain tile floors. Our pH neutral Finish is safe for any hard surface flooring including porcelain. It provides a protective layer to your floors so in that way it is like a sealer. The general rule of thumb is to apply Quick Shine Finish every 2-6 months when needed. The shine will typically last 4-6 months for low traffic homes. Maintain the shine by dry dusting your floors often. You can damp mop for heavier soil with Quick Shine Multi-Surface Floor Cleaner (blue label). As long as you maintain your floors properly and do not over use the Finish, you should never develop a buildup or have to remove the finish. For additional questions, please contact customer service at 800-255-1891. We are always happy to help!
I have used this product on floor tiles in the living room and kitchen. Is it safe for children? Will it cause disease. What should I do if I want to remove it? Is it easy?
Hi Sean,
Quick Shine is proudly backed by EPA/Safer Choice which means it has been deemed safer for kids, pets and our environment. Our pH neutral Finishes and Cleaners are free from any harsh chemicals and will not cause any harm with children. If you decide to remove our Finish, we recommend Quick Shine Deep Cleaner. Simply dilute our Deep Cleaner with hot water and apply to 5′ sections at a time. Allow solution to sit for 3-4 minutes and mop away. Quick Shine Deep Cleaner is only available online at this time at http://www.quickshine.net or http://www.walmart.com. For more information, please contact customer service at 800-255-1891. We are always happy to help!
How often should I use the Quick Shine Floor Finish?
Hi Charlie,
We recommend applying Quick Shine every 2-6 months depending upon foot traffic in your home. You can maintain the shine in between applications with our Quick Shine Cleaner.
Is this safe to use on marble floors?
Yes, Quick Shine can be used on any sealed hard surface flooring including marble. Squirt. Spread. Done!
I like quick shine, but leaves a film could you please tell me how I clean to take off this film to reapply for the next time.
Thanks!
Hi Glad,
We recommend removing Quick Shine Finish from your floors with Quick Shine Deep Cleaner. Simply dilute our Deep Cleaner with hot water and apply to 5′ sections at a time. Allow solution to sit for 3-4 minutes and mop away. Quick Shine Deep Cleaner is only available online at this time at http://www.quickshine.net or http://www.walmart.com. For more information, please contact customer service at 800-255-1891. We are always happy to help!
How frequently can the floor finish be used, particularly in low traffic areas?
Hi Jane,
We recommend applying Quick Shine every 4-6 months for low traffic areas.
I accidentally forgot to rinse out my mop head, whats a good way to remove dried floor finish from it?
Hi Magz,
Try soaking your pad in a mixture of Ammonia and HOT water for about 30-45 minutes and rinse with clean tap water. The polymer should dissolve from the fibers and soften the pad again.
I used quick Shine hardwood floor lister on my floors and they are now a total mess. How do I remove it?
Hi Noreen,
We recommend removing Quick Shine Luster from your floors with Quick Shine Deep Cleaner. Simply dilute our Deep Cleaner with hot water and apply to 5′ sections at a time. Allow solution to sit for 3-4 minutes and mop away. Quick Shine Deep Cleaner is only available online at this time at http://www.quickshine.net or http://www.walmart.com. For more information, please contact customer service at 800-255-1891. We are always happy to help!
Loved my wood floors at first with Quick Shine, then my mom came with her walker and made streaks – which I thought could just be taken care of with another coat of quick shine….wrong
it’s not working. There should be a warning on your bottle that you need Quick Shine Deep Cleaner before putting on another coat and it should be available where I purchased the product to begin with. Really bummed that I can’t find it and need to order on line. I have company coming in two days and don’t have time to get it by then:(
My floors are a mess….
Hi Kathy,
Thank you for your feedback. We are sorry to hear you have to remove the finish and start again. Unfortunately retailers decide which products they will allow space for and we have no control over that. Walmart.com has quick shipping and best pricing right now. You can also try 1 cup of Ammonia with 1/2 gallon of HOT water as an alternative solution. Simply mop solution on 5′ area, allow to sit 3-4 minutes and mop away. This method has worked for other consumers needing to remove the finish in a pinch.
I love the shine on my laminate wood floors; unfortunately, my dog’s nails put scratches throughout. Any suggestions besides removing Quick Shine?
Hi Joy,
Have you tried applying a new coat of Finish over the scratched areas? Unfortunately if that has not worked for you, removing the finish is the best alternative as the scratches are etched into the finish.
Love it. However have area where we roll a chair over at. It has left scruff marks. How do I Fix it.
Hi Debbie,
You can repair small areas of the floor with 3-4 tbsp. of Ammonia and 1 cup of HOT water. Apply this solution to the affected area and allow to sit 3 minutes before wiping away. Once the area is clean and dry, simply reapply a new coat of Finish to even out the appearance again. This method has worked for other consumers with similar situations.